x
Get quotes for electrical certificate of compliance in Delft
2 near you
Answer a few questions and we'll connect you with the best pros for electrical certificate of compliance near you.
What type of service do you need?
What is your emergency issue?
Is the problem affecting the whole building or specific rooms? (optional)
When did the problem start? (optional)
What type of property do you have?
Choose the status for this project.
What type of electrical and wiring service do you need?
What electrical or wiring problem do you have?
What needs to be repaired? (optional)
Are these fixtures indoors or outdoors? (optional)
Is this for an insurance claim-related damage?
What type of property do you have?
Choose the status for this project.
What kind of lighting installation do you need?
How many lights do you need installed?
Will you need lighting installed indoors or outdoors?
What kind of lighting do you want to install? (Select all that apply)
Is there wiring already in place?
Will you supply the light fixtures and materials for this project?
What type of property do you have?
Choose the status for this project.
What type of appliance would you like installed? (Select all that apply)
Are you replacing an existing appliance? (optional)
Are all the appliances being installed on the ground floor? (optional)
What type of property do you have?
Choose the status for this project.
What would you like done?
How many switches or plug points would you like to be installed or repaired?
Is there existing wire at the required location(s)?
Where will the switches and plug points be installed or repaired?
Will you purchase the materials for this project?
What type of property do you have?
Choose the status for this project.
What type of DB box or circuit breaker panel work do you need done? (Select all that apply)
What kind of DB box or circuit breaker panel problem do you have? (Select all that apply)
Which parts need attention?
Is this a recurring problem?
Where is the DB box or circuit breaker panel?
Is this for an insurance claim-related damage?
What type of property do you have?
Choose the status for this project.
Why would you like an electrical Certificate of Compliance (COC)?
How many rooms are in your property?
How old is your property?
Is the property occupied?
Is the Municipal power to the property active and turned on?
What type of property do you have?
Choose the status for this project.
When do you need this service?
Anything else the Pro should know? (optional)
Which suburb are you based in?
We're almost done, we just need your contact details.

Top results for Electrical Certificate Of Compliance in Delft

Delft
B&A investments. We do all type of.. Electrical e.g Tubing&Wiring,Installations,Plugs,Lights,DBboard Upgrading and Coc. Including all electrical maintenance. Painting e.g RoofPainting,Wall painting,Reroofing,Damp proofing,Waterproofin ...show more
0.0
0 reviews
Have you used this business? Write Review
Voorbrug, Delft
Installations & maintenance. We provide our customers with quality and we keep costs to a minimum. We keep everything to the: SANS 10142 -1 SOUTH AFRICAN NATIONAL ELECTRICAL STANDARD. Electrical services for Industrial, Residential a ...show more
5
1 review
by Nathan, 084****244
Sebas 24 7 installed a 13m x 5.2m carport. It was completed in 3 days . Very professional and outstanding workmanship.
Frequently Asked Questions
  • How can I verify if an electrician is registered?

    Here are a couple of ways to certify the authenticity of electricians doing electrical certificate of compliance work:

    - ECA: Check if he or she is a member of the Electrical Contractors Association (ECA).

    - Department of Labour: You can also check with the department of labour if any electrical certificate of compliance electricians are registered with them.

    - References: Call some of the references to get feedback from previous clients on the quality of work done and validity of any CoC issued.
  • Why do I need a CoC when buying a house?

    It gives you comfort knowing all the wiring, lights and plugs are working in the house. Snupit helps you get the best electricians in Delft to help you get an electrical certificate of compliance for complete peace of mind.
  • Will I need a new electrical certificate of compliance if I make changes to my property?

    Yes, but only if the changes affect your electrical system. Any modifications to the existing electrical system require a new CoC. Here is why:

    - New electrical wiring or plugs fitted must be tested to ensure they are wired correctly

    - There might be a need to increase the capacity on your circuit board to handle the new electrical demands
  • How often do I need to get an electrical certificate of compliance issued?

    Your electrical certificate of compliance is valid for a lifetime provided no alterations were made to the existing electrical system. Take note, the CoC doesn’t included the maintenance of your electrical system.

    If ownership changes then a new CoC must be issued if the existing CoC is older than two years. This protects new owners against inheriting electrical problems from the previous owners.
  • How much time does it take for an electrician to inspect the property?

    The inspection involves checking the wiring, lights and anything electrical before a CoC can be issued. It’s a detailed process that's time consuming. The estimated time can range between three and four hours. It’s also not uncommon for larger properties to require almost a full day of inspection.

    Be careful when electricians promise to deliver an electrical certificate of compliance in less than 20 minutes. It’s rarely possible, so it could mean they’re not doing their jobs properly.
  • Is it necessary to do maintenance on your electrical wiring at home?

    Yes, do regular maintenance—yearly if possible—on the wiring in your house to avoid any faults being picked up when you urgently need a CoC to be issued. It will save you money and worries in the long run & minimise any damages to the existing wiring.
  • Why Snupit?

    1. You never pay to use Snupit. It’s free and you get to compare multiple quotes from the best electricians for an electrical certificate of compliance in Delft.


    2. Professionals listed on the Snupit platfor m are experienced, friendly and background-checked. Our numbers say it all! Of the 0 reviews for electricians, our customers have had a positive and a rewarding experience with 0electrical certificate of compliance projects.


    3. Choose from 0 trusted and high quality professionals in Delft who can assist you with just about anything you need done.


    4. Don’t overpay for any service, hire a local expert from our talent pool of 2 electricians for an electrical certificate of compliance in Delft who are skilled and vetted.
Price Estimate for electrical certificate of compliance in Delft

  • Minimum costs for inspection: R1500 :
  • Maximum costs for inspection: R4500 :

Compare quotes from up to 5 local professionals for electrical certificate of compliance

Get things done with Snupit
Free price estimates today from 0 local experts in Delft for just about anything.
Get Started

Quote requests posted by other customers for electrical certificate of compliance

Khayelitsha
  • Request for Electricians. I need electrical inspection in khayelitsha
Kuils River
  • Request for Electricians. -
Vanderbijlpark
  • Request for Electricians. Call before entering the premises
Nelspruit
  • Request for Electricians. My washing machine is not spinning
Hammanskraal
  • Request for Electricians. Pro to call so that we can discuss the details.
Cape Town
  • Request for Electricians. -
Cape Town
  • Request for Electricians. -
Johannesburg
  • Request for Electricians. This is an installation with 5kw solar back-up power which keeps tripping. I need someone with relevant electrical certif...
Kuils River
  • Request for Electricians. - There are plug points however the house purchased on auction needs plug points to be replaced as well as 2 room light ...
Johannesburg
  • Request for Electricians. - I would like to drill an extra conduit hole between DB board and ceiling and add an extra breaker.